Telcall Command; Ver Command - Codan 2110 series Reference Manual

telcall command

Use the telcall command to make a call to a telephone number.
NOTE
Syntax
NOTE
telcall <address of called station>[@<network>] <telephone
number> [from <self address>[@<network>]]
where:
<address of called station>[@<network>] is the address [and network] of
the station with a radio/telephone interconnect unit.
<telephone number> is the telephone number to be dialled by the radio/telephone
interconnect unit.
from <self address>[@<network>] is the self address [and network] you want
to use for this call.

ver command

Use the ver command to display the version of CICS that is being used.
Syntax
ver
Manpack Transceiver 2110 series Reference Manual
Before you can make a Phone call you must know the address of a station
with a radio/telephone interconnect unit through which your call can be
routed to the public telephone network.
For more information on:
• address syntaxes see
• call options see page 407, ALE call options
• recognised variables see
Operating the transceiver from a computer
page 406, Addresses in commands
page 408, Recognised variable expansion
445