Codan 2110 series Reference Manual page 423

If you enter the ALE
address syntax...
ABC,JK3MN,PQR
(example only)
NET address
???
A?B?
(example only)
If you are using multiple addresses with a CICS command, you must enter the addresses
within quotes, for example, 'A12,B45@*CALM'.
With Group Selective addresses, the length of the combined address can be no longer
than 12 ALE words, excluding commas. An ALE word has 3 characters. There can be no
more than five different first ALE words in the combined address.
For example, an address of BOB1,BOB2,BOB3,BOB4,TIM,JOHN,MIK,SUE has
five different first ALE words, that is, BOB, TIM, JOH, MIK and SUE. However, this
address will be rejected because it has a total of 13 ALE words, that is, BOB, 1, BOB, 2,
BOB, 3, BOB, 4, TIM, JOH, N, MIK and SUE.
ALE call options
When you make a call through CICS you can specify whether or not to override the
global settings for the transceiver at the time of the call. For information on the correct
syntax see
Manpack Transceiver 2110 series Reference Manual
The transceiver sends...
a Group Selective call to the stations specifically addressed
(see page 189, Group Selective address
a NET call to all stations with that NET programmed in the
NET List (see
a Wildcard call to listening stations that have a self address
matching the length of the sent address and with any upper-
case letter or number as each of the characters, for example,
SAM, NAA, 234, 3AZ (see
syntax)
a selective Wildcard call to listening stations that have a self
address matching the length of the sent address with A and B
as the first and third characters respectively (A and B may be
any specified upper-case letter or number), and with any
upper-case letter or number in the second and last characters
(in this case), for example, A2BM, ADB1, AZBE, A3B8 (see
page 191, Wildcard address
Table 68 on page 446.
Operating the transceiver from a computer
page 190, NET address
page 191, Wildcard address
syntax)
syntax)
syntax)
407