Table 64: Variable Expansion In A Command - Codan 2110 series Reference Manual

Operating the transceiver from a computer
To...
Enable LQA for a call
Disable LQA for a call
Enable LBT for a call
Disable LBT for a call
Make a call using the current channel only
Enable a scan cycle on all scanned networks between
call attempts
Disable the scan cycle between call attempts
Recognised variable expansion
The variables listed in
variables are recognised by CICS V3.20 (or later) when they are enclosed in double
quotes. CICS expands the variable by inserting the current information associated with
the variable into the message.
NOTE
Table 64:
Keyword Function when used in a call or beacon command
$DATE
$GPS
$GPS+
$TIME
$TZ
$VER
408
Table 64 may be added in a message with any command. These
$GPS and $GPS+ variables require Option GPS Enable to be installed.
Variable expansion in a command
Inserts the current date in the following format:
<name of day> <month> <day> <year>
Inserts the current valid GPS position in the following format:
<latitude> <longitude>
Inserts the current valid GPS position in the following format:
<latitude> <longitude> <altitude> <UTC>
Inserts the current time in the following format:
<hh>:<mm>:<ss>
Inserts the time zone offset in the following format:
<time zone offset>
Inserts the current version of the transceiver unit firmware in the following
format:
<version number>
Type...
+lqa
–lqa
+lbt
–lbt
thischan
+scan
–scan
Manpack Transceiver 2110 series Reference Manual