Controlling Access To Erasing Secure Keys; Enabling Medium Power Level; Enabling The Automatic Removal Of The Incoming Call Pop-Up; Table 78: Code For Controlling Access To Erasing Secure Keys - Codan 2110 series Reference Manual

Controlling access to erasing secure keys

By default, the user can erase CES secure keys and AES secure keys using a hot-key
sequence. A configuration command for controlling access to this hot-key sequence
begins with #$! . Follow this command with the code from
Table 78:
Code
DSE
(Disable Secure Key Erase)
If you want to prevent CES secure keys and AES secure keys from being erased during
the
#$! DSE

Enabling medium power level

You can enable a medium power level in your transceiver. The medium power level is
half of the maximum transmit power level. The configuration command for enabling the
medium power level is #$! MPE.
NOTE
For example, if you want to be able to select the medium power level in the transceiver
using the Tx PWR key, enter the following into the Message 10 entry:
#$! MPE

Enabling the automatic removal of the incoming call pop-up

A pop-up message is displayed when you receive an incoming call. This message usually
remains on the display until you acknowledge it by pressing
Timeout Incoming Call (TIC) configuration command, the incoming call pop-up is
removed after 30 seconds.
For example, if you want to automatically remove all incoming call pop-ups after
30 seconds, enter the following into the Message 10 entry:
#$! TIC
Manpack Transceiver 2110 series Reference Manual
Code for controlling access to erasing secure keys
Description
Prevents CES secure keys and AES secure keys from being erased during
+ SEC hot-key sequence (see
the
secure keys and page 301, Erasing all of the AES secure
The CES Global secure key and Base secure key are not erased
NOTE
during this hot-key sequence.
+ SEC hot-key sequence, enter the following into the Message 10 entry:
The medium power level is available with firmware V4.93 or later, and
requires PA PIC version 2.03 or later. For more information contact your
Codan representative.
Controlling user access
Table 78.
page 284, Erasing all of the CES
keys).
or . When you use the
481