Programming The Address List - Codan 2110 series Reference Manual

The Address List

Programming the Address List

Creating an entry in the Address List
To create an entry in the Address List:
1
1
1
182
Press VIEW until the Address List is displayed.
Use the List Manager to create an entry (for help see
a list and page 72, Entering and editing
Enter the setting information provided in the following table as required, then
press to enter the information.
If this prompt is
displayed...
New name?
<Call type>? and
<Address>
Message?
Phone Link?
text).
Do this...
• enter a name for the new entry (for example, the
name of the person or station you want to call
using this entry)
• select the call type you want to use, or select
<No call type> if you want to be prompted to
select a call type when you make the call
• enter the address to which you want to send the
call, or leave the address empty if you want to be
prompted to enter an address when you make the
call
If you selected Phone? as the call type,
enter the telephone number you want to call.
NOTE If you leave this setting empty, you are
prompted for a telephone number when you
make the call.
For information on the address syntaxes for
NOTE MIL-STD-188-141B ALE calls see
page 186, Special ALE address
• enter the message you want to send, or
• leave the message empty if you want to be
prompted to choose a stored message when you
make the call (see
• select the phone link station through which you
want to make the call, or
• select <blank> if you want to be prompted to
select a phone link when you make the call
Manpack Transceiver 2110 series Reference Manual
page 113, Creating an entry in
syntaxes.
page 196, Message call)