Appendix A Hot Key Examples; Example 1: Selecting A Specific Channel - Codan 2110 series Reference Manual

Hot key examples

Example 1: selecting a specific channel

This example shows you how to create a macro to select a specific channel in the
Channel List.
When you run this macro, the transceiver:
•
•
•
•
To create this macro:
1
1
1
1
1
1
1
1
1
1
388
opens the Channel List
selects the channel specified in the macro
briefly displays the new channel
returns you to the screen you were on
Press VIEW until the channel screen is displayed.
Scroll to the channel you want the macro to select.
Hold to open the List Manager.
Scroll to Macros..., then press
Scroll to Create macro, then press
The transceiver asks you to select the action you want the macro to perform.
Scroll to Go to this chan, then press
The transceiver asks you to select the timing with which the macro operates.
Scroll to Before pause, then press
When you use a macro to select a channel, the channel is always
NOTE
selected before the channel screen is displayed. You can therefore
select Before pause or After pause. The end result is the same.
Press the key to which you want to assign the new macro.
Scroll to the macro you want to have in the list immediately after the new macro,
then press .
Type a name for the macro, then press
The macro is created and assigned to the key, and the List Manager remains open.
.
.
.
.
.
Manpack Transceiver 2110 series Reference Manual