Codan 2110 series Reference Manual page 282

The Control List
Entering a serial command into the startup entry
To enter commands into the startup entry:
1
1
1
1
1
1
1
1
1
Editing a serial command in the startup entry
To edit an existing command in the startup entry:
1
1
1
1
1
1
1
1
266
Press until Main Menu is displayed.
Scroll to Control, then press
Scroll to RS232..., then press
Scroll to Startup, then press
If a serial command has not yet been entered, the List Manager is displayed.
If one or more commands have already been entered, the screen displays the first
command. Hold to open the List Manager.
Scroll to Add item, then press
Enter the command, then press
NOTE For help with entering text see
The new command is stored and the List Manager remains open.
If you want to view the command you have stored, press
Manager.
Press until Main Menu is displayed.
Switch the transceiver off then on again to activate the command.
until Main Menu is displayed.
Press
Scroll to Control, then press
Scroll to RS232..., then press
Scroll to Startup, then press
Scroll to the command you want to edit, then hold
Edit the command, then press
NOTE For help with entering text see
Press until Main Menu is displayed.
Switch the transceiver off then on again to activate the command.
.
.
.
.
.
page 72, Entering and editing
.
.
.
.
.
page 72, Entering and editing
Manpack Transceiver 2110 series Reference Manual
text.
to close the List
text.