Enabling Gps Format Options; Table 79: Codes For Enabling Gps Format Options - Codan 2110 series Reference Manual

Controlling user access

Enabling GPS format options

You can set up how you want GPS information to be displayed in your transceiver. A
configuration command for enabling these format options begins with #$! . Follow this
command with the codes you want to use from
Table 79:
Code
GPSHA
(GPS Hide Altitude)
GPSS
(GPS Seconds)
NOTE
For example, if you want to display GPS information in degrees, minutes and seconds,
and hide the altitude reading, enter the following into the Message 10 entry:
#$! GPSS GPSHA
482
Codes for enabling GPS format options
Description
Hides the altitude reading from the GPS information.
Displays the GPS information in degrees, minutes and seconds.
The default display of GPS information is degrees and decimal minutes.
Table 79.
Manpack Transceiver 2110 series Reference Manual