Tuning The Antenna; Automatic Tuning - Codan 2110 series Reference Manual

Operating the transceiver

Tuning the antenna

WARNING

Automatic tuning

If the transceiver is connected to an automatic tuning antenna, it tunes the antenna
automatically when required.
To tune the antenna when you select a channel:
1
1
Removing the tuning message
To remove the tuning message before tuning is complete:
1
Aborting automatic tuning
To abort automatic tuning:
1
98
Before using the antenna system see the safety information provided on
page 491, Radiation
Select a channel in the Channel List (for help see
Press then release PTT.
A message is displayed to inform you that tuning has begun, and the transceiver
makes a series of short beeps. Tuning typically takes 1 to 2 seconds.
If tuning fails, a message is displayed to inform you of this, and the transceiver
makes an error beep. You may need to manually tune the antenna (see
Manual tuning).
Press .
The beeps continue until tuning is complete.
Press PTT.
A message is displayed to inform you that tuning has been aborted, and the
transceiver makes an error beep.
safety.
page 71, Selecting a
Manpack Transceiver 2110 series Reference Manual
channel).
page 99,