Settings In The Network List - Codan 2110 series Reference Manual

The Network List

Settings in the Network List

NOTE
Network Name
CAUTION
Scan Network
The Scan Network setting applies to all types of networks. It enables you to specify
whether or not you want the channels in the network to be scanned when scanning is
switched on. You can also set the transceiver to scan for voice in voice networks even
when the Mute Type is set to Selcall.
NOTE
Call System
The Call System setting applies to all types of networks. The call system is the method
used by the network to make and receive calls, for example, Codan Selcall, Open Selcall,
ALE/CALM, or Voice Only. The call systems from which you can select depend on the
options installed in the transceiver.
If your network uses the Codan Selcall or Open Selcall call system, you can make calls
by selecting an appropriate channel/mode then entering the address of the station you
want to call. When your call is detected by the receiving station, that station rings to alert
the operator. If your network uses the ALE/CALM call system, the transceiver can select
the best channel/mode for you. If your network uses the Voice Only call system, you can
make calls by selecting an appropriate channel/mode, then holding down PTT and
speaking. You cannot enter the address of the station you want to call.
A Codan Selcall network can receive calls sent from a transceiver using the Open Selcall
protocol. If you want to be able to make calls to transceivers that use the Open Selcall
protocol, you must set up an Open Selcall network to use with these calls.
CAUTION
144
In the following discussion, you must log in as administrator to see the
Network List (see page 128, Logging in to admin level from user
You should be aware of any restrictions placed on network names in your
transceiver when it is used with a Codan HF data modem, a radio/
telephone interconnect, UUPlus© software, or InterNav© software.
The transceiver is able to scan a maximum of 100 channels at a time. If
the total number of channels in all the networks you are scanning exceeds
100, only 100 of the channels are scanned.
Any station that is tuned to your frequency and has mute switched off can
listen to your voice conversation.
Manpack Transceiver 2110 series Reference Manual
level).