Call Command - Codan 2110 series Reference Manual

Operating the transceiver from a computer

call command

Use the call command to establish a voice link with another station on the current
channel in an ALE/CALM or a Codan Selcall network.
Syntax
NOTE
call <address of called station>[@<network>] ["<amd>"] [from
<self address>[@<network>]]
where:
<address of called station>[@<network>] is the address [and network] of
the station you want to call.
<amd> is the written text message that is to be sent to the station. Use single or double
quotes, or backslashes to recognise spaces in the message text.
from <self address>[@<network>] is the self address [and network] you want
to use for this call.
If you have the FED-STD-1045 ALE/CALM option installed, you can use the global
ALL address syntax (@?@) with the call command. If you have the MIL-STD-188-
141B ALE option installed, you can use the ALL, ANY, Group Selective, NET, or
Wildcard address syntax with the call command (see
commands).
NOTE
420
For more information on:
• address syntaxes see
• call options see page 407, ALE call options
• recognised variables see
You can use any of the characters in the basic 38 ASCII subset (A to Z,
0 to 9, @ and ?) for the address.
page 406, Addresses in commands
page 408, Recognised variable expansion
page 406, Addresses in
Manpack Transceiver 2110 series Reference Manual