Aletelcall Command - Codan 2110 series Reference Manual

aletelcall command

Use the aletelcall command to select the best channel on which to establish a link
to an addressed station, then make a telcall on that channel. A telcall is a call to a
telephone number.
NOTE
To disconnect the link, either:
•
•
Syntax
NOTE
aletelcall <address of called station>[@<network>]
<telephone number> [from <self address>[@<network>]]
where:
<address of called station>[@<network>] is the address [and network] of
the station with a radio/telephone interconnect unit.
<telephone number> is the telephone number to be dialled by the radio/telephone
interconnect unit.
from <self address>[@<network>] is the self address [and network] you want
to use for this call.
Manpack Transceiver 2110 series Reference Manual
Before you can use the aletelcall command, you must know the
address of a station with a radio/telephone interconnect unit through
which your call can be routed to the public telephone network.
use the scan on command to close the link and resume scanning (see
scan command), or
use the hangup command to terminate the link (see
For more information on:
• address syntaxes see
• call options see
• recognised variables see
Operating the transceiver from a computer
page 406, Addresses in commands
page 407, ALE call options
page 408, Recognised variable expansion
page 433,
page 425, hangup command)
417