Codan 2110 series Reference Manual page 463

Table 68:
Command syntax
gpsposition <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] [from <self
address>[@<network>]]
hangup
help [<category>]
lbt [measure]
link
lock [abort|break|steal|off|on]
lqa [output [off|on]]
mode [<name>]
mute [off|voice|selcall]
pagecall <address of called
station>[@<network>] [±lbt]
[±lqa] [±scan] "<message>" [from
<self address>[@<network>]]
prompt [off|<text string>|time]
Manpack Transceiver 2110 series Reference Manual
Summary of CICS command syntax (cont.)
Function
Makes a Send Position call to addressed stations using
any, or the specified, ALE/CALM or Codan Selcall
network from the self address specified.
Closes an active link between your transceiver and the
station that you are calling.
Displays the categories of help available, or detailed help
for the commands within the selected category.
Displays the current LBT Mode, or performs a check on
the current channel for the presence of data or voice.
Displays the current link status of the transceiver.
Displays the current lock status of the transceiver,
attempts to break a lock, steals a lock, releases all locks,
or sets a lock.
Displays:
• the LQA information from the current or last-
established ALE link since startup of the transceiver
• the current status of the asynchronous output
Sets the asynchronous output of LQA information to:
• off (no output, default)
• on (channel name, current station, local
BER/SINAD, remote BER/SINAD, and LQA score)
Displays the mode of the current channel, or sets the
mode of the current channel to that specified, if the mode
is permitted for that channel.
Displays the current status of the speaker mute.
Sets mute to off, that is, all on-air noise is audible.
Sets mute to voice or selcall. For more information on
mute types see
Makes a Send Position call to addressed stations using
any, or the specified, ALE/CALM or Codan Selcall
network from the self address specified. Your message
must be written within double or single quotes. See
Table 67 on page 430
Enables the prompt output on the command interface and
displays the current prompt type, switches between a
variable text string prompt or the time prompt (time since
the transceiver was last reset), or disables the prompt.
Operating the transceiver from a computer
page 83, Muting the transceiver.
for details on the message length.
447