Codan 2110 series Reference Manual page 40

The 2110 series Manpack Transceiver
Table 3:
Hot key Function
GPS Pressing GPS displays your current GPS position, if your transceiver has valid GPS
information and Option GPS Enable is installed. For more information see
GPS Screen
EASITALK Pressing EASITALK toggles the DSP noise reduction algorithm on or off. For more
information see
VIEW Pressing VIEW toggles between the channel screen and the Address List. If you are in
any other list, pressing VIEW displays the channel screen.
CALL LOGS Pressing CALL LOGS repeatedly steps through a number of call logs: Calls Out, Calls
In, Last Heard, then back to the screen from which you began. In these logs, you can
view the details of the calls or detected stations. For more information see
The Calls Out Log
The Last Heard log is available if you have the MIL-STD-188-141B ALE option
installed (2110 only).
Holding
(Emergency) contained in the Emergency entries in the Address List (see
different types of
(Power) Pressing
off.
+ SEC Pressing
keys from the transceiver, if the encryptor hardware option is fitted and specific
firmware is programmed into the transceiver and enabled. For more information see
page 284, Erasing all of the CES secure
keys
+ 9
Pressing
more information see
+ 0 Pressing
backlighting. For more information see
+ Pressing
then shut it down immediately. For more information see
Mode.
24
Standard hot keys (cont.)
entry.
page 101, Reducing background noise with
and page 221, The Calls In
starts an automatic Emergency call transmission using call information
calls).
toggles the screen and keypad backlighting between the default setting and
+ SEC enables you to erase all of the CES secure keys and AES secure
(voice), and page 324, Erasing all of the AES secure keys
+ 9 enables you to change the default setting for the screen contrast. For
page 96, Changing the screen
+ 0 enables you to change the default setting for the screen and keypad
+ enables you to clear certain configuration settings from the transceiver,
Easitalk™.
Log.
page 176, Making several
keys, page 301, Erasing all of the AES secure
contrast.
page 96, Changing the screen
page 231, Cfg Abandon
Manpack Transceiver 2110 series Reference Manual
page 259,
page 216,
(data).
brightness.