Settings In The Network List - Codan 2110 Reference Manual

Ssb
Hide thumbs Also See for 2110:
Table of Contents

Advertisement

Settings in the Network List

NOTE
Network Name
CAUTION
Scan Network
The Scan Network setting applies to all types of networks. It enables you to specify
whether or not you want the channels in the network to be scanned when scanning is
switched on. You can also set the transceiver to scan for voice in voice networks even
when the Mute Type is set to Selcall mute.
NOTE
Call System
The Call System setting applies to all types of networks. The call system is the method
used by the network to make and receive calls, for example, Codan Selcall, ALE/CALM
or Voice Only. The call systems from which you can select depend on the options
installed in the transceiver.
If your network uses the Codan Selcall call system, you can make calls by selecting an
appropriate channel/mode then entering the address of the station you want to call. When
your call is detected by the receiving station, that station rings to alert the operator. If
your network uses the ALE/CALM call system the transceiver can select the best
channel/mode for you. If your network uses the Voice Only call system, you can make
calls by selecting an appropriate channel/mode then pressing PTT and speaking. You
cannot enter the address of the station you want to call.
CAUTION
Call Detect Time
The Call Detect Time setting applies to all types of networks. The call detect time is the
length of time the transceiver pauses on each channel, when scanning, to detect an
incoming call. You can set the call detect time to <default> or to a specific value.
2110 SSB Transceiver Reference Manual
In the following discussion, you will need to log in as administrator to see
the Network List (see
page 110, Logging into admin level from user
You should be aware of any restrictions placed on network names in your
transceiver when it is used with InterNav software.
The transceiver will scan a maximum of 100 channels at a time. If the
total number of channels in all the networks you are scanning exceeds
100, only 100 of the channels will be scanned.
Any station that is tuned to your frequency and has mute off can listen to
your voice conversation.
The Network List
level).
123

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2110 and is the answer not in the manual?

Table of Contents