Inserting a LS Syringe into the LS Tool
Thermo Scientific
To insert a LS syringe into the LS tool
1. Remove the retaining nut from the LS Tool, then insert the syringe such that the flat side
of the flange matches with the cut-out of the upper part of the holder. See
Figure 46. Syringe Insertion into LS Tool
2. Carefully insert the syringe body guiding the needle tip into the upper and the lower
needle guide. Press the syringe flange firmly into the tool holder.
2
Installation of the TriPlus RSH System
Inserting a LS Syringe into the LS Tool
Figure
TriPlus RSH Hardware Manual
46.
53