Introduction - Thermos TriPlus RSH Hardware Manual

2
Installation of the TriPlus RSH System

Introduction

Introduction
Who Performs the Installation
Space Requirements
Electrical Requirements
Sampler Supports
10 TriPlus RSH Hardware Manual
This chapter describes the installation of the TriPlus RSH and its modules. Referencing of the
TriPlus RSH and teaching of the various modules are described in
Defining Object Positions."
CAUTION The TriPlus RSH is installed by authorized Thermo Fisher Scientific technical
personnel, who will check its correct operation. For more details, please contact Thermo
Fisher Scientific local representatives. Should the instrument not be installed by Thermo
Fisher Scientific personnel, please strictly adhere to the following instructions.
Provide enough space around the instrument on which the TriPlus RSH must be installed
making reference to the overall dimensions of the sampler described in the TriPlus RSH
Preinstallation Requirements Guide.
WARNING Pay attention not to operate on the instrumental parts included in the work
area of the sampler when this is in movement.
The power line and the connections between the instruments must maintain good electrical
grounding. Poor grounding represents a danger for the operator and may seriously affect the
instrument performance.
CAUTION Do not connect the TriPlus RSH to lines feeding devices of a heavy duty
nature, such as motors, UV lamps, refrigerators and other devices that can generate
disturbances.
Pay attention not to leave any cable connecting the sampling unit and the
chromatographic system or the power cord close to the GC hot air vents.
Connect the TriPlus RSH only to instruments complying with the IEC 61010 safety
regulations.
The TriPlus RSH is installed on the GC by using the two appropriate supports provided.
Every support has a bar provided with holes for the fixing on the GC, and a vertical support
leg provided with clamps for the correct hookup of the sampler.
Chapter 3, "TriPlus RSH
Thermo Scientific