Create Configuration Backup File - Thermos TriPlus RSH Hardware Manual

Create Configuration Backup File

Thermo Scientific
3. Press Start to copy the file to the USB memory devise.
4. At the end of the process the message backup has been created successfully appears.
5. Remove the USB Stick.
The backup file has the following name convention:
Diagnosticbackup_Date_Time_Number.pack
The system creates a directory on the USB Stick, named Backup. The configuration
backup is stored as a single archive file with the extension *.pack.
This option creates a configuration backup file of the TriPlus RSH in its current status.
The configuration backup is stored on the SD card installed on the control board.
IMPORTANT Be aware that only one backup file can be stored on the SD card.
If for example a Diagnostic Backup file is created and directly followed by creating a
Configuration Backup file, the first file, in this example the Diagnostic Backup file, will
be overwritten.
To save both files it is necessary to copy each file immediately onto the USB Stick. See the
section "Copy a Configuration Backup File"
 To create a configuration backup file
1. Select from the Options pull-up menu the list item Maintenance.
2. Select the item Create Configuration Backup.
Create Configuration Backup File
on page 116.
TriPlus RSH Hardware Manual
4
TriPlus RSH Firmware
115