Preventative Maintenance - Thermos TriPlus RSH Hardware Manual

Preventative Maintenance

Thermo Scientific
Table 16. Maintenance Steps (Sheet 2 of 2)
Maintenance Step
Wash and Waste Solvent reservoirs
(Fast Wash Module)
Cleaning the TriPlus RSH when working
with hazardous material.
Planned Preventative Maintenance (PM) is a procedure to protect and maintain the operating
performance of the TriPlus RSH. The objective of the PM document is to define Preventative
Maintenance (PM) requirements and acceptance criteria for the System.
A Preventative Maintenance check must always precede the annual Qualifications Test.
This measure reduces the risk of failing the Qualifications Test.
Successful completion of this Preventative Maintenance check provides assurance that the
TriPlus RSH is still running according to Thermo Fisher Scientific specifications.
Failure to implement the PM check can compromise the reliability of the TriPlus RSH over
the long term.
The PM check is not a substitute for a specific repair or hardware upgrades, and does not serve
as part of a general overhaul. It is considered an initial, preparatory step for any OQ/testing
that may follow.
Contact your Thermo Fisher Scientific representative to perform an annual preventative
maintenance on the TriPlus RSH.
IMPORTANT There are no operator-serviceable or replaceable parts inside the Power
Module of the TriPlus RSH. In case of a failure, contact your Thermo Fisher Scientific
representative.
Interval
Weekly or as needed.
• Check the solvent frit for contamination
or biological growth in the solvent
reservoir bottle.
• Check solvent lines and connectors for
integrity.
• Check glass liners in the wash block for
integrity and ensure free flow in the wash
block.
• Check waste line for blockage.
For regular cleaning and maintenance or
after a spill.
See "Working with Hazardous Material and
Decontamination" on page
TriPlus RSH Hardware Manual
5
Maintenance
Preventative Maintenance
132.
131