Installing The Triplus Rsh Head - Thermos TriPlus RSH Hardware Manual

Installing the TriPlus RSH Head

Thermo Scientific
Note Installation of the TriPlus RSH Head (Z-axis) must be done carefully.
When installing it for the first time, have someone hold it in place while the mounting
screw is inserted.
IMPORTANT The head is secured with a Transport Locking Device in order to prevent
uncontrolled movement of the slider along the Z-Axis during the shipping. The locking
device must be removed before installing the head to the base.
The TriPlus RSH Head is shipped disassembled. The cover is separated from the mechanical
part.
 To install the TriPlus RSH head
1. Locate the Transport Locking Device screw. Using a Torx T10 screwdriver remove the
screw and the polymer spacer. See
Figure 6. Transport Locking Device
2
Installation of the TriPlus RSH System
Figure 6.
Transport Locking Device

Installing the TriPlus RSH Head

TriPlus RSH Hardware Manual 23