Installing A Tray Holder - Thermos TriPlus RSH Hardware Manual

2
Installation of the TriPlus RSH System

Installing a Tray Holder

Installing a Tray Holder

40 TriPlus RSH Hardware Manual
Figure 27. Fast Wash Station Connections
 To install the tray holder
1. Use the T20 Torxhead screwdriver to loosen the two Torx screws on the two mounting
clamps.
2. Install the Tray Holder with the mounting clamp teeth fitting into the grooves on the
bottom of the X-axis.
Figure 28. Tray Holder Installation
Thermo Scientific