Installing The Solvents Station - Thermos TriPlus RSH Hardware Manual

2
Installation of the TriPlus RSH System
Installing the Wash Stations

Installing the Solvents Station

38 TriPlus RSH Hardware Manual
 To install the solvents station
1. Use the T20 Torxhead screwdriver to loosen the screw from the Wash Station mounting
clamp.
2. Hook the Solvents Station assembly to the X-axis.
Figure 25. Solvent Station
3. Tighten the mounting screw.
4. Place the solvent reservoir bottles onto their holders.
WARNING The Waste reservoir MUST be placed in a lower position than the Solvents
Station assembly.
Make sure that the waste liquid flows into the container without restriction.
For safety reasons, place the waste container into a collection pan.
Thermo Scientific