Adjust The Image; Rotate The Integrator Rod - Christie CP2215 Service Manual

Hide thumbs Also See for CP2215:

Table of Contents

Adjust the Image

This section provides information and procedures for adjusting the projector image.

UV HAZARD! When servicing the projector with the top lid removed anyone within the

immediate vicinity must wear ultraviolet (UV) glasses with side shields. Failure to comply

results in death or serious injury.

Whenever the integrator module is moved or replaced, its rotation must be corrected for

proper focus and full illumination of the three digital micromirror devices (DMDs).

1. Display a full white field test pattern:

a. On the touch panel controller (TPC), tap the Test Pattern icon (

b. Tap All Test Patterns.

c. Tap RGB-12bit-Full Screen White.

2. Remove the top lid. See

3. Put on a pair of heat resistant gloves and UV resistant glasses.

4. Open the integrator rod access door.

CP2215 Service Manual

020-101226-03 Rev. 1 (10-2015)

Remove the Top Lid

on page 22.

) in the taskbar.

Table of Contents