Remove The Integrated Cinema Processor - Christie CP2215 Service Manual

Parts and Module Replacement

Remove the Integrated Cinema Processor

1. Back up your screen configuration and MCGD files.
2. Turn the lamp off and cool the projector for at least 15 minutes.
3. Turn the projector off and then disconnect it from AC power.
4. Remove the top lid. See
5. Remove the security lid. See
6. Reach into the projector and pull the lever to release the security ring.
7. Pull the ejectors on the ICP outward.
8. Pull the ICP outward out of the card cage.
When reinstalling the PIB you must perform Marriage so you can continue to play encrypted
content. See Activate Marriage in the CP2215 user manual.
44
Remove the Top Lid on page 22.
Remove the High Security and Light Engine Lid on page 24.
CP2215 Service Manual
020-101226-03 Rev. 1 (10-2015)