Remove The Backplane - Christie CP2215 Service Manual

Remove the Backplane

The backplane is located at the back of the card cage. The PIB and ICP boards are connected directly
to the backplane.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the card cage. See
4. Pull the lever to release the card cage security ring.
5. Remove the PIB. See
6. Remove the ICP. See
7. Remove the IMB faceplate.
8. Remove the 4 screws securing the EMI shield to the top of the card cage and then remove the
EMI shield and set it aside.
9. Disconnect the marriage interlock switch (P12) connector from the backplane.
CP2215 Service Manual
020-101226-03 Rev. 1 (10-2015)
Remove the Card Cage
Remove the Projector Intelligence Board
Remove the Integrated Cinema Processor
Parts and Module Replacement
on page 41.
on page 42.
on page 44.
45