Replace The Douser Assembly - Christie CP2215 Service Manual

12. Loosen the 3 captive screws (A, B, and C) securing the light engine to the light tube with a hex
key.
When loosening screw A, make sure you do not contact the capacitor with the hex key. If you
damage the capacitor, the light engine must be returned to Christie.
13. Remove the light engine from the projector.
14. Cover the light engine with an electro-static protective cover.

Replace the Douser Assembly

The douser is attached to the light engine prism. It can be removed on its own, or with the light
engine.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
4. Remove the high security lid. See
CP2215 Service Manual
020-101226-03 Rev. 1 (10-2015)
Remove the Top Lid on page 22.
Remove the High Security and Light Engine Lid
Parts and Module Replacement
on page 24.
37