Example of reference position to read distance
How to read distance in case of standard lens or telephoto lens
The ring (focus ring) on which number values are written rotates in case of standard lens or telephoto lens.
If the "distance indicator" includes decimal point, "." is determined as reference position; and if it does not
include decimal point, the center of the number or [ ] is determined as reference position.
Standard lens
Figure 1-1
Example when setting to "0.25"
0.25
Telephoto lens
Figure 2-1
Example when setting to "0.9"
0.9
1
How to read distance in case of wide lens
The ring (focus ring) on which indicator position (the white circle in the figures below) is written rotates in case of wide lens.
Set the indicator position to the line of number value.
Wide lens
Figure 3-1
Example when setting to "0.2"
1
0.5
0.3
0.24 0.2
Figure 1-2
Example when setting to "diverting
point between 0.25 and 0.3 in 1:1"
0.3
0.25
Set in reference of the 1/2
position between decimal
points of 0.25 and 0.3.
Figure 2-2
Example when setting to "diverting
point between 1 and 1.5 in 1:2"
0.9
1
Set in reference of the 1/3
position between the center
of 1 and decimal point of 1.5.
Figure 3-2
Example when setting to "0.3"
1
0.5
Figure 1-3
Example when setting to "diverting
point between 0.5 and 1 in 1:1"
0.3
Set in reference of the 1/2
position between decimal point
of 0.5 and the center of 1.
Figure 2-3
Example when setting to "diverting
point between 1 and 1.5 in 2:1"
1.5
Set in reference of the 2/3
position between the center
of 1 and decimal point of 1.5.
0.3
0.24 0.2
25
0.5
1
1
1.5