Change Target Reference - Konica Minolta CM-M6 Instruction Manual

Change Target Reference

… „
This section describes how to change the target data selection.
Display the sample for which the target reference is to be changed on the <Sample> screen in advance.
Setting Procedure
1
Use [] or [] to move the cursor to "Change
Target reference", and then press the [Confirmation]
key.
The <Change Target reference> screen is displayed.
2
The target color data number being used will be
displayed. Use [] or [] to move the cursor to the
color difference reference color number, and then
press the [Confirmation] key. When the target color
data is set, the screen returns to the <Sample>
screen.
• If [ESC] is pressed, the target changes will not be applied
and the screen will return to the <Data management>
screen.
If a number to which no color difference target data has
Notes
been set, the target will be determined as "None" and
the color difference and pass/fail judgment will not be
displayed.
63
Start the procedure from the <Sample menu> - <Data management> screen.
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Delete data
Set Sample as Target
Change Target reference
0002 TARGET-2
Change list position
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Change Target reference
Delete data
0004: TARGET-4
2016/8/25 11:18:04
Set Sample as Target
0 0 4 / 2 0 0
Change Target reference
0002 TARGET-2
Change list position