Configuration Of The Ca-410 Series; Configuration - Konica Minolta CA-410 Instruction Manual

Configuration of the CA-410 Series

1. Configuration

The CA-410 series consists of the following three systems:
zProbes „
Sensor units for measuring displays.
Can be connected to a PC to perform measurement (using PC software).
Can be connected to a data processor to perform measurement.
zData Processor CA-DP40 „
Can connect up to ten probes simultaneously to perform measurement.
Can be connected to a PC so that it can be controlled from the PC (using PC software).
zPC software CA-S40
„
Can control a probe connected to a PC to perform measurement.
Can control a data processor connected to a PC to perform measurement.
The Probe + Data Processor Instruction Manual (this document) contains the following descriptions for probes and Data
Processor CA-DP40:
• Handling procedure and specifications of probes
• How to measure when probe and data processor are connected
• How to connect the data processor to a PC
8