Connecting A Printer; Printer; (Commercially Available) - Konica Minolta CR-10 Plus Instruction Manual

Connecting a Printer

Connecting a Printer
The instrument can also be connected to a printer, and the sample data or target data
displayed on the instrument's LCD screen can be printed. For information on connectable
printers, contact a KONICA MINOLTA-authorized service facility.
Memo • Only text can be output to the printer.
• The USB communication port on the instrument is USB 2.0-compliant.
Notes • Firmly push in the USB cable connector that matches the shape of the
port (connection terminal) until it can go in no further.
• Make sure the power to both the instrument and the printer is turned
OFF before connecting or disconnecting.
• Disconnect the connection cord only by the plug or by holding the
connector. Also, do not pull the cord itself or bend it with unreasonable
force.
• Do not touch the terminal portion of the connector, get the terminals
wet, or subject the terminals to unreasonable force.
• Use a cord with a suitable length. If the cable is not of a suitable length,
connection problems may arise or the cable may break.
• The instrument has one USB connection terminal. Connecting to both a
PC and a printer at the same time is not possible. When connected to a
printer, make sure the instrument is connected to the AC adapter or has
batteries.
Operating Procedure
Color Reader
CR-10 Plus
❶
Turn the instrument power OFF.
Open the connector's protective cover, and connect the Micro-A
connector of the USB cable to the USB connection terminal on the
instrument.
 Firmly push it in until it can go no further and verify
that it is securely connected.
❷
Connect the Micro-B connector of the USB cable to the
USB port on the printer.
❸
Turn the instrument power ON.
❹
Turn the printer ON.
MENU/OK
❺
Press on the instrument, move the selection frame
to "USB Connec." using either
MENU/OK
press .
❻
Move the selection frame to "Printer" using either
MENU/OK
or , and then press
❼
Click  "Back" to go back to the <MENU> screen.
Memo When connected to a printer, the instrument will display the
printer connection icon ( ) on the top of the LCD screen.

Printer

(Commercially available)

Ver.1.00.0000
MENU
Back
Browse Data
Language
Avg. Meas.
Tol. Judg.
or , and then
Mask Setting
Auto Off
Preset
Date/Time
USB Connec.
.
10:00
MENU
Back
USB Connec.
Disconnect
PC
Printer
73