Connecting A Printer - Konica Minolta BC-10 Plus Instruction Manual

Connecting a Printer

Connecting a Printer
The instrument can be connected to the accessory printer so that the data displayed on
the instrument's LCD screen can be printed. For information on connectable printers,
contact a KONICA MINOLTA-authorized service facility.
Memo • Only text can be output to the printer.
• The USB communication port on the instrument is USB 2.0-compliant.
Notes • Firmly push in the USB cable connector that matches the shape of the
port (connection terminal) until it can go in no further.
• Make sure the power to both the instrument and the printer is turned
OFF before connecting or disconnecting.
• Disconnect the connection cord only by the plug or by holding the
connector. Also, do not pull the cord itself or bend it with unreasonable
force.
• Do not touch the terminal portion of the connector, get the terminals
wet, or subject the terminals to unreasonable force.
• Use a cord with a suitable length. If the cable is not of a suitable length,
connection problems may arise or the cable may break.
• The instrument has one USB connection terminal. Connecting to both a
PC and a printer at the same time is not possible. When connected to a
printer, make sure the instrument is connected to the AC adapter or has
batteries.
Operating Procedure
BAKING METER
BC-10 Plus
❶
Turn the instrument power OFF.
Open the connector's protective cover, and connect the
USB cable to the USB port on the instrument. Connect the
Micro-A connector of the USB cable to the USB connection
terminal on the instrument.
Firmly push it in until it can go no further and verify
that it is securely connected.
❷
Connect the Micro-B connector of the USB cable to the
USB port on the printer.
❸
Turn the instrument power ON.
❹
Turn the printer ON.
MENU/OK
❺
Press on the instrument, move the selection
frame to "USB Connec." using either
MENU/OK
and then press .
❻
Move the selection frame to "Printer" using either
MENU/OK
or , and then press
❼
Click  "Back" to go back to the <MENU> screen.
Memo When connected to a printer, the instrument will display
the printer connection icon (
screen.
Printer
(Commercially available)
Ver.1.10.0000
MENU
Back
Browse Data
Mask Setting
Auto Off
or ,
Date/Time
USB Connec.
.
MENU
Back
) on the top of the LCD
USB Connec.
Disconnect
PC
Printer
63
10:00