Connecting An Ac Adapter - Konica Minolta CR-10 Plus Instruction Manual

Handling the Instrument

Connecting an AC Adapter

Notes • When using AC power for the instrument, be sure to use the optional AC adapter (AC-A308) or the USB bus power AC adapter (AC-A305J,K,L,M).
• When connecting or disconnecting the plug, be sure to verify that the power has been turned OFF.
Memo Be sure to connect the USB bus power AC adapter (AC-A305J,K,L,M) using the USB cable (IF-A25) supplied with the product.
When Using the AC Adapter (AC-A308) (Optional Accessory)
❶
Verify that the power has been turned
OFF (LCD screen display is blank).
❷
Close the protective connector cover
for the AC adapter socket.
❸
Connect the AC adapter connector
plug to the AC adapter socket.
❹
Plug the AC adapter power plug into a
socket with 100–240 VAC (50/60 Hz).
(Cont.)
LCD screen
Protective
connector
cover
When Using the USB Bus Power AC Adapter (AC-A305J,K,L,M) (Optional Accessory)
Although the AC adapter plug can be connected and disconnected with the instrument
power turned ON, in this section, the power is turned OFF before connection.
❶
Verify that the power has been turned
OFF.
❷
Plug the connector on the USB cable
(A type) into the AC adapter.
❸
Connect the connector (B type) of the
USB cable to the USB connection
terminal as shown in the diagram.
❹
Plug the AC adapter power plug into a
socket with 100–240 VAC (50/60 Hz).
14
LCD screen