Settings - Siemens 6MD85 Manual

Control Functions
6.4 Synchronization Function
This parameter is used to set the frequency difference for switching over between synchronous and asynchro-
nous operation.
Siemens recommends using the default setting of 0.01 Hz.
6.4.8.3

Settings

Addr.
General
_:5041:1
_:5041:101
_:5041:102
_:5041:110
_:5041:108
_:5041:126
De-en.gized switch.
_:5041:105
_:5041:106
_:5041:107
_:5041:103
_:5041:104
_:5041:109
Asynchr. op.mode
_:5041:114
_:5041:113
_:5041:115
_:5041:116
_:5041:117
_:5041:118
Synchr. op.mode
_:5041:119
_:5041:120
386
Parameter C
Sychr./Asycr.1:Mode
Sychr./Asycr.1:Min. oper-
ating limit Vmin
Sychr./Asycr.1:Max.
operat. limit Vmax
Sychr./Asycr.
1:Max.durat.
sync.process
Sychr./Asycr.1:Direct
close command
Sychr./Asycr.1:Voltage
adjustment
Sychr./Asycr.1:Close
cmd. at V1< & V2>
Sychr./Asycr.1:Close
cmd. at V1> & V2<
Sychr./Asycr.1:Close
cmd. at V1< & V2<
Sychr./Asycr.1:V1, V2
without voltage
Sychr./Asycr.1:V1, V2
with voltage
Sychr./Asycr.1:Supervi-
sion time
Sychr./Asycr.1:Async.
operating mode
Sychr./Asycr.1:CB make
time
Sychr./Asycr.1:Max.
voltage diff. V2>V1
Sychr./Asycr.1:Max.
voltage diff. V2<V1
Sychr./Asycr.1:Max.
frequency diff. f2>f1
Sychr./Asycr.1:Max.
frequency diff. f2<f1
Sychr./Asycr.1:Sync.
operating mode
Sychr./Asycr.1:f-
threshold ASYN<->SYN
Setting Options
•
off
•
on
•
test
0.300 V to 340.000 V
0.300 V to 340.000 V
0.00 s to 3600.00 s; ∞
•
no
•
yes
0.500 to 2.000
•
no
•
yes
•
no
•
yes
•
no
•
yes
0.300 V to 170.000 V
0.300 V to 340.000 V
0.00 s to 60.00 s
•
off
•
on
0.01 s to 0.60 s
0.000 V to 170.000 V
0.000 V to 170.000 V
0.000 Hz to 4.000 Hz
0.000 Hz to 4.000 Hz
•
off
•
on
0.010 Hz to 0.200 Hz
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
Default Setting
off
90.000 V
110.000 V
30.00 s
no
1.000
no
no
no
5.000 V
80.000 V
0.10 s
on
0.06 s
5.000 V
5.000 V
0.100 Hz
0.100 Hz
on
0.010 Hz