Application Notes And Setting Notes For The External 1-Of-N Check Function Block - Siemens 6MD85 Manual

Control Functions
6.3 Control Functionality
[scbbcon6-270313-01.tif, 1, en_US]
Figure 6-57
Depending on the transmission reason, the desired control value or the actual state value of the controllable
and the switching device can be contained in the log.
The following table shows the relationship.
Table 6-23
Reason for Transmission
Selected (SEL)
Operate (OPR)
Command cancellation (CNC)
Command execution and termination (CMT)
Spontaneous change (SPN)
Application Notes and Setting Notes for the External 1-of-n Check Function
6.3.3
Block
Parameter: Feedba. mon. time release
•
Default setting (_:101) Feedba. mon. time release = 5.00 s
With the parameter Feedba. mon. time release, you specify the time within which the release request
must be confirmed via the input
Parameter: Feedba. mon. time reset
•
Default setting (_:102) Feedba. mon. time reset = 5.00 s
With the parameter Feedba. mon. time reset, you specify the time within which the withdrawal of the
release requests must be confirmed via the input
358
Spontaneous Status Change
Relationship between the Reason for Transmission and the Value Logged
>Release active .
Value
Desired value
Desired value
Desired value
Actual value
Actual value
>Release active .
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017