Settings - Siemens SIPROTEC 7SC80 Series Manual

Functions
2.1 General

2.1.1.3 Settings

Addr. Parameter
103 Grp Chge OPTION
104 OSC. FAULT REC.
112 Charac. Phase
113 Charac. Ground
115 67/67-TOC
116 67N/67N-TOC
122 InrushRestraint
140 46
150 27/59
154 81 O/U
170 50BF
180 Fault Locator
181 L-sections FL
350 Battery Charger
26
Setting Options
Disabled
Enabled
Disabled
Enabled
Disabled
Definite Time
Disabled
Definite Time
Disabled
Definite Time
Disabled
Definite Time
Disabled
Enabled
Disabled
TOC ANSI
TOC IEC
Definite Time
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
enabled w/ 3I0>
Enabled w/o I>
Disabled
Enabled
1 Section
2 Sections
3 Sections
Disabled
Enabled
Default Setting
Disabled Setting Group Change Option
Enabled Oscillographic Fault Records
Definite Time 50/51
Definite Time 50N/51N
Definite Time 67, 67-TOC
Definite Time 67N, 67N-TOC
Disabled 2nd Harmonic Inrush Restraint
Disabled 46 Negative Sequence Protection
Disabled 27, 59 Under/Overvoltage Protec-
tion
Disabled 81 Over/Underfrequency Protec-
tion
Disabled 50BF Breaker Failure Protection
Disabled Fault Locator
1 Section Line sections for fault locator
Enabled Battery Charger
E50417-G1140-C486-A1, Release date 12.2011
Comments
SIPROTEC, 7SC80, Manual