MA lighting dot2 User Manual page 115

Go to a specific cue in a cue list
You can go to a specific cue by pressing the
(with Please )
E.g. you want to go to cue number 3, but you don't want to run through the other cues to get there:
3 Please .
This can also be done using a specific fade time. E.g. you want to go to cue number 10, but cue 10 have a 2
minute fade time. You just need to be in cue 10, so you would like to overwrite the cue fade:
Time (= Fade command)
Copy a cue
You can copy a cue to a different cue by using the
"CueOnly" will copy your cue without tracking the copied values, but leaving the cues following the new cue without
changing their look. "Status" is used to include tracked values in the source cue. If this isn't activated, then you'll
only copy the attribute values that are actually stored in the source cue.
Depending on your copy destination, then you also have some different options. If you are copying to a new, not
already existing, cue then you can just copy the cue. If you copy to an already existing cue, then you can choose to
merge the new values into the destination or you can choose to overwrite the existing values with the new ones -
this will delete all the existing values and apply the new values.
E.g. you want to copy your cue 2 at a new location. It's going to be cue number 3.5 - you want the tracked values
from cue number 1 to be included and you don't want to change cue number 4:
Please . Then you get a Choose Copy method window like this:
Figure 3: Choose copy method.
This might look a little different depending on if you already got a cue 3.5 or if its a new cue we are creating. Make
sure status have a checkmark, and if you can see the "CueOnly" option, then make sure it also have a checkmark.
Now tap Copy or Merge depending on your options.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Goto key. You go to the cue as soon as you execute the command
1 Please . Now you fade into cue 10 in 1 second.
Copy key. The copy operation can have two copy options.
115
Goto Cue
Goto Cue 1 0
Copy Cue 2 At 3 . 5