MA lighting dot2 User Manual page 424

b) Press Prvw and tap at executor 102 in the
c) Press Prvw and tap at executor 102 in the
d) Press Prvw and press the actual
e) Press Prvw Exec 1 0 2 Please
The preview of executor 102 is visible in the
Hint:
To have a quick overview in the preview mode about different executors at the same time, press and
hold the Prvw
Example 2
Let´s assume you will have a preview of cue 1 on the main executor without having an actual DMX output.
Requirement:
The main executor is off.
There are three ways to do this:
a) Press Prvw and tap at cue 1 in the
b) Press Prvw Cue 1 Please
c) Press Prvw Please
The preview of cue 1 on the main executor is visible in the
Example 3
Let´s assume you will step thru the cue list on the main executor with cue timing and without having an actual DMX
output.
1. Open the main executor in the preview mode, press
Cue 1 on the main executor is in preview.
2. Press the small Go+
Cue 2 on the main executor is in preview with cue timing, e.g. fade.
Hint:
To go back from cue 2 to cue 1 in the preview mode use the small
Example 4
Let´s assume you will step thru the cue list stored on executor 2 without having actual DMX output.
1. Open executor 2 in the preview mode, press
Cue 1 of Executor 2 is in preview.
2. Press Prvw and then
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
executor pool
virtual playbacks
executor button
.
fixtures view
key and press the different
cues view
.
.
(=Go) Prvw .
Prvw
Next .
view.
view.
of executor 102 on the console.
without having a DMX output.
executor buttons on the console.
of the main executor.
fixtures view without having a DMX output.
Prvw Please .
and the executor button of executor 2
424
Go- and Prvw on the console.