MA lighting dot2 User Manual page 214

d o t 2 U s e r Ma n u a l
Fader View
The fader view is the second tab of the color preset type view.
Figure 2: Fader View
In this view, you select the color from the color faders.
There are three different ways of the color mix system, each with three faders.
1. Hue - Sat. - Bright.
First fader displays the hue in degrees.
Second fader displays the saturation in percent.
Third fader displays the brightness in percent.
2. Cyan - Magenta - Yellow
First fader displays the cyan ratio in percent.
Second fader displays the magenta ratio in percent.
Third fader displays the yellow ratio in percent.
3. Red - Green - Blue
First fader displays the red ratio in percent.
Second fader displays the green ratio in percent.
Third fader displays the blue ratio in percent.
Q-Fader
To select from which color attributes should the selected color mostly be mixed from, swipe the up or
down.
Swatchbook View
214
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m