MA lighting dot2 User Manual page 456

Remote Input Identification
Improved in this release
The remote inputs configuration window is improved by an input activity indication.
DMX-in works with DMX values 1-255 for fader, and 128-255 for buttons and commands. The indicator shows only the
valid DMX value (>0 for fader, >127 for buttons and commands).
For more information, see
MIDI Notes and Midi Show Control
New in this release
New MIDI Show Control (MSC) Configuration Window in the Setup.
New MIDI Monitor Window in the Tools. A history off all midi-note events and MSC in and out logs in different colors
are displayed.
New MIDI Configuration Window in the Tools. Only available for dot2 onPC.
MIDI Note out is implemented. Midi notes can be send via command line or cue command in the
Example: MidiNote [midichannel] . [note] [velocity] on / off
For more information, see:
MIDI Show Control Window
MIDI Configuration Window
MIDI Monitor Window
MidiNote Command
All Presets Pool
New in this release
Store in the All presets pool presets without a preset type filter.
Example: Gobo and focus and prism values together in one preset.
To go to the All Presets Pool, tap All in the
For more information, see
Cue Protection
New in this release
In the Cues View is a column
protected cue. It is a dynamic tracking protection. If a cue is set to protected, a white line is displayed to see where
the tracking stops.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Remote Inputs Configuration
preset type bar
Presets Pools View.
Protected
. Protect a cue means that changing cues before can not modify the
Window.
or press and hold
456
Cues View.
+ 0 .