View Command - MA lighting dot2 User Manual

Group 1 is updated.
Example 2
Let´s assume, you edited preset 1 by using the
Press Update Please
The console asks, if you want to update Preset 1. Tap Ok .
Preset 1 is updated.
Example 3
Let´s assume, you have some values in the programmer and you will update preset 1 to these values.
There are two ways to do this:
a) Press Update and tap at preset 1 in the
b) Press Update Preset 1 Please
Preset 1 is updated with the values in the programmer.
After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.
Example 4
Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.
There are three ways to do this:
a) Press Update 2 (=Cue 2)
b) Press Update 2 (=Cue 2) and press executor button 2
c) Press Update 2 (=Cue 2) and tap at executor 2 in the
If cue 2 on executor 2 is your current active cue, press
Cue 2 of executor 2 is updated with the values in the programmer.
Related Links
Edit Command
Update Key
What is a Programmer?
Presets Pools View

View Command

© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
edit
.
preset pools
.
Exec 2 Please
command, and now you will apply the changes to preset 1.
view.
.
.
executor bar window.
Update and the executor button 2
449
.