Goback Command - MA lighting dot2 User Manual

8.28. Go Command
This page describes the syntax and how to use the go command.
To go to the go command, press the small
Description
With the go command you can e.g.
go to the next cue of a cue list
start running an executor
Syntax
1. Go to the next cue of a cue list.
Go
2. Start running an executor.
Go Executor 1
Example 1
Let´s assume, the executor 1 is running and you will go forward to the next cue on the cue list stored on executor 1.
There are two ways to do this.
a) Press the small Go +
b) Press the small Go +
The next cue is running.
Example 2
Let´s assume, the executor 1 is off and you will start it running.
There are two ways to do this.
a) Press the small Go +
b) Press the small Go +
The executor starts running with the first cue.
Related Links
Small Go + Key
Executor Go Key

GoBack Command

© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Go + on the console.
(= Go) and the respective executor button
(= Go) and tap on the respective executor in the
(= Go) and the respective executor button
(= Go) and tap on the respective executor in the
.
executor bar
.
executor bar
394
view.
view.