MA lighting dot2 User Manual page 216

d o t 2 U s e r Ma n u a l
Raw Color Views
The raw color views starts after the third tab in the color preset view, depending on the fixture type.
Figure 4: Raw color view
In the raw color view, you control the raw color channel values in percent from the selected fixtures.
All fixture types with CMY are displayed as inverted RGB.
To select the DMX values from the color channel, move the slider up and down.
Encoder Bar Functions
The color preset type view has different encoder bars depending on the selected view.
Color Picker and Color Fader Encoder Bar
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key . The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the key and press the encoder key . The
encoder speed equals one DMX step.
Figure 5: Color picker and color fader encoder bar
To use the second function of an encoder, press and hold the key.
To open the calculator, press the encoder.
216
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m