Outfade Command - MA lighting dot2 User Manual

8.43. OutDelay Command
This page describes the syntax and how to use the OutDelay command.
To go to the OutDelay command it is necessary to press another function key before, e.g.
times Time .
Description
With the OutDelay command, you can store a cue and set its out delay time.
Out delay is a waiting time for getting smaller dimmer values.
Syntax
Store a cue and set its out delay time.
Store Cue 1 OutDelay 4
Example
Let´s assume, you will store a new cue 1 on the main executor and set its out delay time of 4 seconds.
There are three ways to do this:
a) Press Store 1 (= Cue 1) four times
b) Press Store 1 (= Cue 1) four times
c) Press Store 1 (= Cue 1) four times
view.
Cue 1 is stored on the main executor with an out delay time of 4 seconds.
Double check the out delay time in the
Related Links
Time Key
Cues View
Executor Bar Window

OutFade Command

© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Time (= OutDelay) 4 Please
Time (= OutDelay) 4 and the large
Time (= OutDelay) 4 and tap on the main executor in the
cues view.
414
Store and then four
.
Go .
executor bar