MA lighting dot2 User Manual page 421

8.48. Preset Command
This page describes the syntax and how to use the preset command.
To go to the preset command, press
Description
With the preset command, you can e.g.
label a preset
apply presets to fixtures
Syntax
1. Label a preset.
Label Preset 1
2. Apply a preset to a fixture.
Fixture 1 At Preset 1
Example 1
Let´s assume, you will label dimmer preset 1 as "close".
1. Open the dimmer presets
2. a) Press Label Preset 1 Please
2. b) Press Label and tap on preset 1 in the dimmer preset pool.
The Enter Name for Window
Example 2
Let´s assume, you will apply color preset 2 (= red) to fixture 1.
There are two ways to do this:
a) Select fixture 1 in the
b) Press Fixture 1 At Preset 4
Preset 2 from the color preset pool is applied at fixture 1.
Related Links
Preset Key
Presets Pools
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Preset on the console.
pool.
.
opens.
fixtures view, open the color presets pool
(= color presets pool)
and tap on preset 2 (= red).
. 2 (= preset 2 red)
421
Please .