MA lighting dot2 User Manual page 433

Description
Important:
Before using the SetIP command, save the show file. To save the show file, press
Backup .This is necessary because after the SetIP command, the console needs a reboot to apply the
new IP address.
Important:
The Art-Net IP address has to be an address with 2.x.x.x. or 10.x.x.x. .
With the SetIP command, you can:
Change the Art-Net IP address
Change the sACN IP address
See the available Ethernet interfaces along with their IP address in the
After an IP address change, a reboot is necessary.
Syntax
1. Change the Art-Net IP address.
SetIP eth0:1 2.2.3.5
2. Change the sACN IP address.
SetIP eth0 192.168.0.5
3. Displays the available Ethernet interfaces along with their IP address in the
SetIP
Example
Let´s assume, it is necessary in your network to change the Art-Net IP address.
1. To save the show file, press
2. Open the command line window
SetIP eth0:1 2.2.3.5
3. Press Please .
The console ask if you want to reboot now.
4. Tap Reboot Now .
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Backup Backup .
to use the virtual keyboard and type:
433
Backup
command line window.
command line window.