MA lighting dot2 User Manual page 292

Flip:
To change the pan and tilt combination and point your fixture in the same direction, tap Flip . The values are
active in the programmer.
Home:
To bring the pan and tilt to the center position, tap Home . The values are active in the programmer.
There are six different align functions.
Align is a function to adjust the position values from the fixtures in the selected order. The Align buttons have the
same function as the Align
Align >:
To adjust from high to small.
Align <:
To adjust from small to high.
Align ><:
To adjust from the high to small to the middle and from the middle from small to high.
Align <>:
To adjust from the small to high to the middle and from the middle from high to small.
Wings:
This is only for pan attributes to split from the middle into two groups.
The first fixture type is in group 1 and follows the entered pan values.
The last fixture type is in group 2 and acts mirror inverted.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
key. For more information, refer to Align Key.
292