MA lighting dot2 User Manual page 412

On Fixture 1
5. Active all values from a preset type for the selected fixtures in the programmer.
On PresetType 1
Example 1
Let´s assume, you will turn on executor 1.
There are three ways to do this.
a) Press On , and the respective executor button
b) Press On Exec 1 Please
c) Press On , and tap the respective executor button in the
Executor 1 is on.
Example 2
Let´s assume, you will turn on executor 1 with a fade time of 2 seconds.
Press On Exec 1 Time
Executor 1 will go on with a fade time of 2 seconds.
Example 3
Let´s assume, you will turn on all normal executors with a cue list on the current page.
Press On Thru Please
All normal executors with a cue list on the current page are turned on.
Example 4
Let´s assume, you will activate all values from fixture 1 thru 10 in the programmer.
There are two ways to do this:
a) Press On Fixture 1 Thru 10 Please
b) Select fixture 1 thru 10 in the fixtures view and press twice
All values from fixture 1 thru 10 are active in the programmer.
Example 5
Let´s assume, you will active all dimmer values for the selected fixtures in the programmer.
There are three ways to do this:
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
.
(=Fade) 2 Please .
.
.
.
executor bar view.
Please .
412