Synceffects Command - MA lighting dot2 User Manual

Figure 2: Fixtures Sheet after store with StoreLook
Press + Store (=StoreLook) and the respective executor button
All dimmer values are stored.
All attributes are stored if the dimmer value was bigger than 0.
For more information about the colors in the
8.62.

SyncEffects Command

This page describes the syntax and how to use the SyncEffects command.
If you type the SyncEffects command in the console, by press and hold
the command will be directly executed.
You can also use the command line along with the virtual keyboard and type the word SyncEffects in.
To go to the SyncEffects command press and hold
The command will be directly executed.
Description
With the SyncEffects command, you synchronize all running effects.
You can also use the Sync button in the
Syntax
To synchronize all running effects.
SyncEffects
Example
Let´s assume you have fixture 1-8 running with a dimmer PWM (=Pulse-width modulation) effect and fixture 11-18
also running with a dimmer PWM effect.
They are not synchronized and you want to have them synchronized.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
fixtures sheet, refer to
+ Effect
Effects View.
440
.
System Colors - Values.
+ Effect
(=SyncEffects) on the console.
(=SyncEffects),