Unpark Command - MA lighting dot2 User Manual

The first cue of the cue list will be executed.
The top command is basically a
Syntax
1. Jump directly to the top of a cue list from an executor.
Top Executor 1
2. Jump with fade time to the top of a cue list from an executor.
Top Executor 1 Fade 3
Example 1
Let´s assume you will jump directly to the top of a cue list from the executor 1.
To get a dimmer output, make sure that the fader of an exutor is not at 0 %.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash
b) Press + Flash
c) Press + Flash
The first cue of the cue list will be executed.
Example 2
Let´s assume you will jump to the top of a cue list from executor 1 with the fade time of 3 seconds.
Press + Flash (=Top)
The first cue of the cue list will be executed with a fade time of 3 seconds.
Related Links
MA Key
Goto Command
Goto Key
Exec (Executor) Key
8.67.

Unpark Command

This page describes the syntax and how to use the unpark command.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Goto command.
(=Top) and the respective executor button
(=Top) Exec 1 Please
(=Top) and tap on the respective executor in the
Exec 1 Time (=Fade)
.
.
executor bar
3 Please .
446
view.