MA lighting dot2 User Manual page 138

DMX View
Pressing the DMX key will open the
This is used to display your current DMX output.
DMX tester
The DMX command can be used to turn on specific DMX channels directly with out having to patch fixtures to the
DMX address - This is called
the output. This means that it "locks" the channel while the DMX Tester have the control. You need to release the
DMX channel from the Tester before it acts normal again.
For example:
DMX 1 At 100
Will turn DMX channel at 100% = a DMX value of 255.
Off DMX 1
Will release the DMX channel from the DMX Tester.
Select a Fixture
It can also be used to select a fixture that uses a DMX channel.
For example:
DMX 2.40
Selects the fixture that uses DMX channel number 40 on the second DMX universe.
Direct patching
You can use the DMX key, and the
For example:
Assign Fixture 5 at DMX 2.1
This will patch fixture 5 to DMX address 1 in the second universe.
Delete DMX 3.1
This will unpatch whatever fixture is patched to the first DMX address in the third universe.
Advanced functionality
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
DMX view on screen 1.
DMX Tester
. DMX channels that are controlling by the DMX Tester have a high priority in
DMX command, to patch fixtures.
138